A reflector system for the solo creator.
Small and lightweight package, easy to use.
Each reflector has 20 x 20 cm (approximately 8 x 8 inch), with plastic corner protection and cold shoe mount on rear.
Two different packages:
SLL3-20 – dedolight Lightstream Lite Standard Kit
|
|
|
|
Single | Total |
|---|---|---|---|---|
| 1 | DLLR1-20x20 | Lightstream Lite reflector #1, 20x20cm | 52,00 € | 52,00 € |
| 1 | DLLR2-20x20 | Lightstream Lite reflector #2, 20x20cm | 52,00 € | 52,00 € |
| 1 | DLLR3-20x20 | Lightstream Lite reflector #3, 20x20cm | 52,00 € | 52,00 € |
| 2 | DLSA1/4 | Stand fitting. 16mm receptacle to 1/4" female thread | 11,00 € | 22,00 € |
| 3 | DMFA22 | Flexible arm 22cm with 1/4" thread and camera shoe mount | 34,00 € | 102,00 € |
| 2 | CLAMP-M | Mini clamp with 1/4" und 3/8" female thread | 10,50 € | 21,00 € |
| 1 | DH3 | Mounting plate with 1/4" female thread | 29,00 € | 29,00 € |
| 1 | DLPLAST | Lightstream plast | 19,50 € | 19,50 € |
| 1 | DPINSET | Set of 10 office pins | 3,50 € | 3,50 € |
| 1 | DLRP20 | Pouch for up to 7x 20x20cm reflectors | 49,50 € | 49,50 € |
list price 405,00 €
SLL5-20 – dedolight Lightstream Lite Master Kit
|
|
|
|
Single | Total |
|---|---|---|---|---|
| 2 | DLLR1-20x20 | Lightstream Lite reflector #1, 20x20cm | 52,00 € | 104,00 € |
| 2 | DLLR2-20x20 | Lightstream Lite reflector #2, 20x20cm | 52,00 € | 104,00 € |
| 1 | DLLR3-20x20 | Lightstream Lite reflector #3, 20x20cm | 52,00 € | 52,00 € |
| 2 | DLSA1/4 | Stand fitting. 16mm receptacle to 1/4" female thread | 11,00 € | 22,00 € |
| 5 | DMFA22 | Flexible arm 22cm with 1/4" thread and camera shoe mount | 34,00 € | 170,00 € |
| 3 | CLAMP-M | Mini clamp with 1/4" und 3/8" female thread | 10,50 € | 31,50 € |
| 2 | DH3 | Mounting plate with 1/4" female thread | 29,00 € | 58,00 € |
| 1 | DLPLAST | Lightstream plast | 19,50 € | 19,50 € |
| 1 | DPINSET | Set of 10 office pins | 3,50 € | 3,50 € |
| 1 | DLRP20 | Pouch for up to 7x 20x20cm reflectors | 49,50 € | 49,50 € |
list price 617,00 €
Mounting Devices
ADAPTER
DLSA1/4
for stands and clamps with baby stud 16mm
1/4 inch receptacle fits flexible mounting arms DMFA22 (40)
list price 11,00 €
FLEXIBLE MOUNTING ARMS
DMFA22
22 cm, with shoe mount,
¼ inch thread and counter nut
list price 34,00 €
Option: DMFA40, 40 cm length is also available – list price 45,50 €
CLAMPS
CLAMP-M
Our little clamps open wider than you think. Use to attach to furniture, machines, curtain rods, anything. 1/4 inch receptacle fits flexible mounting arms DMFA22 (40)
list price 11,00 €
CLAMP-D
dedolight clamp D with ¼ inch receptacle‚
for flexible mounting arms DMFA22 (40)
list price 48,00 €
CLAMP1
A traditional dedolight clamp
with ¼ inch receptacle at the end of the stud
list price 45,00 €
CLAMP-S
dedolight scissor clamp CLAMP-S for mounting
on tiled office ceilings on the metal strip
list price 19,00 €
MAGIC PUTTY
DLPLAST
Apply to the surface (flat or not), then press the plate and fold some putty up and over the edge of the plate (don’t do it the other way round, it may not hold).
In most cases this works well.
Can be removed with no traces.
Looks like dinosaur shit.
Works well (most of the time).
list price 20,00 €
MOUNTING PLATE
DH3
dedolight Lightstream mounting plate
- Tape onto flat surfaces
- Wedge into drawers, bookshelves, door frames, ceiling light fixtures
Attach to wood with four of the enclosed pins
Code: DH3/DMFA22
Mounting plate with flex-arm attached with gaffer tape
list price 29,00 €
DPINSET
Fixing pins for DH3 plate on wood or similar surfaces.
list price 4,00 €
Downloads
-
dedolight Lightstream Lite Brochure
The dedolight Lightstream Lite brochure, a reflector system for the solo creator.
Mehr
All prices on this website reflect German list prices in Euro, excluding value added tax. All these prices are “ex warehouse Munich”. Valid for sales in Germany and Austria only. All specifications and prices are subject to change without prior notification.